Chinese research identifies screen printing wear mechanism in copper solar cells
A Chinese research group identified screen mesh knuckles as the progressive wear mechanism degrading passivation layers in copper-plated heterojunction solar cells. Their study shows screen printing-induced efficiency decline in commercial production reduced from 26.2% to 25.7% over 15,000 consecutive printing cycles. Minority carrier lifetime degraded from 0.61% to 11.0% after the same cycles. They developed an optimized emulsion buffer layer with 4.7% coverage that reduced minority carrier lifetime degradation to 0.41% after 10,000 cycles and prevented degradation over 40,000 cycles in tested configurations. The team achieved 25.2% efficiency in silver-free heterojunction solar cells using copper electroplating in April 2026, while Forschungszentrum Jülich and other groups reached 23.08% and 23.95% efficiency respectively using copper metallization. This work addresses a critical friction point in solar cell manufacturing where copper plating—promising lower costs—faces reliability challenges. The buffer layer’s ability to maintain performance across 40,000 cycles suggests a pathway to stabilize copper-plated cells without silver, potentially lowering long-term production costs for solar energy. What to watch: Scaling the buffer layer solution to commercial production while verifying its durability under real-world manufacturing conditions. All numerical data reflects specific experimental conditions in the referenced study, and 2026 dates represent publication timelines in the source text.
Source: pv magazine
Many Minded